.png)
Keystone Pipe Handling Tools Beckets & Bails
-
NG # 00100-HW-KEY-053
-
MF # 00100-HW-KEY-053
Manufactured by:
KET manufactures two different beckets, the standard that can be used with standard drill pipe elevators from 3 ½” – 5 ½” and the Extended shank especially designed for tall hydraulic elevators from 5” – 6 5/8”. Perfection Links are also offered in lengths 36” – 42” in ratings of 100 & 150 ton capacity.
Specification
Part No.
Description
Weight
E31189-120-124
Standard 150 Ton “DC” Becket for 120-124 Bore Codes
175.00
E31189-120-124-XL
Extended Shank 150 Ton “XLDC” Becket for 120-124 Bore codes
371.00
E31189-123-740 – XL
Extended Shank 150 Ton “XLDC” Becket for 123-740 Bore codes
425.00
E70508-1036
2″ X 36″ 100 Ton Perfection Link Bails
125.00
E70508-1042
2″ X 42″ 100 Ton Perfection Link Bails
150.00
E70508-1542
2-1/2″ X 42″ 150 Ton Perfection Link Bails
175.00
Description
The becket is an inverted U-shaped bar used to suspend pipe elevators from ears of the traveling block. Bails are made of straight rods that have eyes on both ends. These bails come in two sets that are attached to the elevator. Essentially, one eye of each bail is attached to the becket through two holes on each side (ears), while the other ends are attached to the elevator. If the beckets are attached to the traveling block, they can be kept away from an elevator currently in use to lower the pipe into the ground. The resulting working distance allows for more room for the crew to work with, reducing risk for injury. This is the most valuable benefit from using beckets and bails.