RKI Beacon 3200 Controller
002751-HW-RKI-051
Overview
The all new Beacon 3200 is a versatile, advanced fixed system controller for up to 32 points of gas detection. It is capable of controlling up to 32 separate gas detection sensors. Sensor types can be direct connect, 4-20 mA (2 or 3 wire) or Modbus transmitters. The Beacon 3200 can be powered by either 115 VAC, 220 VAC, or 24 VDC. A battery backup option is available and receives its trickle charge from the Beacon 3200. It is simple to operate and comes complete with a wall mount installation kit.
Physical | |
| Dimensions | Height: 16” (40.64 cm) x Width: 13.75” (34.93 cm) x Depth: 6.5” (16.51 cm) |
| Enclosure | NEMA 4X fiberglass / polyester with lexan window for indoor and outdoor locations. |
| Conduit Connection | 3/4” NPT conduit hubs, 9 provided, for sensor, power, & relay wiring. |
| Wiring Termination | Screw type terminal block, 14 gauge max. |
| Power | 115 VAC, 220 VAC, or 24 VDC nominal. Battery backup option available. |
| Optional Accessories | Strobe light, and battery backup assembly. |
| Controls | Touchscreen, reset button. |
| Environmental | |
| Operating Temperature | -40°F to 122°F (-40°C to 50°C) |
| Storage Temperature | -40°F to 158°F (-40°C to 70°C) |
| Relative Humidity | 0 – 80% RH |
| Enclosure Rating | NEMA 4X enclosure, chemical and weather resistant. Suitable for indoor and outdoor installations. |
Inputs | |
| Direct Wired Sensors | LEL, Oxygen, Carbon Dioxide, and various toxic gas sensors.
Amplifier not required for less than 500 feet. |
| 4-20 mA | Accepts any 4-20 mA transmitter (24 VDC, 2 or 3 wire). A wide variety of RKI/Riken sensors are available with 4-20 mA signals. Wiring distances up to 8,000 feet. Compatible with: S2 Series, M2A, T2A, T3A, VOC Pro, Air Alert, GD-70D, and others. |
| Modbus | Accepts M2A, T3A, VOC Pro, Air Alert. |
| Sampling Methods | Diffusion and sample draw heads available. |
Outputs | |
| Relays | Four common Form C (C, NO, NC) relays (Fail, Alarm-1, Alarm-2, Alarm-3). Common relays may optionally be assigned to function as additional channel alarm relays, providing for up to three alarm relays per channel. Additional relays available on optional relay cards. 115/220VAC, 6A, or 30VDC contact relay. |
| 4-20 mA | Signal output, 4-20 mA (maximum load impedance 500 ohms output), per channel. |
| RS-485 Modbus | Modbus format RS-485 serial output of all channel data, including gas reading and alarm status. |
| Ethernet | Modbus TCP/IP output of all channel data, including gas readings and alarm status. |
| Display | 7” Color LCD display of all 32 channels. |
| Audible | Built-in audible alarm, 90 dB, mounted on enclosure.
Coded output: pulsing = gas alarm, steady = fail |
| Visual |
|
| Datalogging | Included as standard for all 32 channels. Records to SD card. |
The large 7” color LCD touchscreen can access control and maintenance functions as well as display all 32 channels. The Beacon 3200 is housed in a NEMA 4X rated case for a weather tight seal. This case design complies with lockout / tag out standards and can be fully secured. An external reset switch allows alarms to be silenced from outside the controller housing. Nine bottom wiring hubs allow for easy wiring.